Amazon Basics Hard Camera Case with Wheels, Large, Black, Solid, 22"L x 14"W x 9.8"H

When I ride (ATV) I take a Go Pro, two Garmin Montana 600 GPSs, a Nikon AW-120 rugged camera, spare batteries for all of those and chargers. The first case I had for those was rubbish. The sides bent under minimal pressure because it was thin plastic. I did not want to repeat that with this case.I wanted a case to carry just my camera with the lens I use for general purpose, rugged and waterproof because it's going fishing with me.I am really pleased with the outcome. First, the case is MUCH nicer than I expected. It is a lot sturdier and much better made than I expected. It does have an "o" ring seal around the opening so it should be waterproof. It also has a pressure relief valve. And the pick-'n-pull foam is sturdy, not thin cheap crap.My method of putting the camera on the foam and drawing an outline with a yellow highlighter worked pretty well. As you can see from the photo without the camera I left some foam on the bottom level to add support on the underside. I left some extra space where the lens attaches to the body so I can get my hand/fingers around the lens to lift the camera out. And in the last photo you'll see I added the two spare batteries.Again, I am really pleased with the case and would highly recommend it. I think it is very good value for money. If I decide to build a bigger case to carry additional camera equipment, I will definitely get the big brother to this one.

Being retired military, I have used dozens of Pelican-brand hand cases (and many no-name brands). It's hard to beat the absolutely indestructibility of a true Pelican case. However, this case comes very close and at nearly half the cost. No, I did not expose this case to the rigors I put my Pelican's as replacing them would be on my dime, not my rich Uncle's! If you need hard-case storage, I highly recommend checking this out - I doubt you will regret the decision.

This case comes in real handy, on one of my long Sporting Events, I can carry up to 3 cameras and other needed equipment, camera related items. Its very sturdy and a real hard plastic, and also the two wheels and telescoping handle that retracts, is very convenient.

Others have written (positively) about the general features of this case and I concur with those conclusions. But I wanted to leave this review for a specific use - holding a set of the Rokinon/Samyang Cine-AF lenses launched in 2023. This case is as close to perfect as you can get for this purpose - and at a really great price.I ordered this case the same day I ordered my new set of Rokinon Cine-AF lenses. I had been looking for a hard case that would fit the set well (not too big, but still enough padding.) The measurements on the product description indicated this would fit the bill. The lenses and the case arrived the same day and after (carefully) pulling the pick-foam from the right spots, it became clear the case was exactly what I needed. The fit is snug, but snug is safe. There's even room for a fifth lens when the 20mm comes out.The latches are tight, but I suspect they'll loosen up some over time.

We got this to store our Star Link Mini in when not in use. It is constructed as good as other name brands and does its job. Easy to customize the foam with the pluck style sheets. Only complaint is wish it had latches on the sides and not just opposite the hinges as it seems to gap a little more there than where the latches are so may not seal perfectly. Works just fine for my purpose.

This is a very sturdy case for many uses .

Really good stout case, not the easiest foam to modify but just make sure your blade is sharp and you shouldn't have any trouble making spaces for your items.Foam waffle weave glued to the lid and comes in two layers of pick foam on this model each about 2.5" thick plus there is a solid layer of foam under these about 1" so there is a lot of padding available.Very secure once you close the latches and lock them down, should protect things well.All that being said just like any of these small cases/safes even if pad locked or securely closed, if you want to open them and don't care about the case, a small 3lb sledge will probably crack any of them open without too much effort.Just be aware of what purpose it is serving. Was bought to organize and protect some electronics.Great all around case and highly recommend it.