Description
- Jumpstart Immediately For 12V Diesel / Gasoline Cars Through thousands of voltage and current measurements， the car can be jump started in a second when the car battery is Low. 1600A Peak current | 800A Starting curren Applicable Vehicles Sedan, SUVS, Commercial Vehicles, Minivans, Motocycles, Pickup trucks, Electric Cars Charing Without Sockets Emergency power supply for devices with rated power of less than 100w for daily use. Four-port Output Suitable for jumpstarting cars motocycles and charging on digital devices Dual-use charger/energy storage Charge on Phones and Tablets With Type-C to Type-C fast charging cable.About 1.5 Hours, Fully charge the jump starter, PLease use a 65W or above charger and standard charging cable. Jumpstart 20 Times after Charge Once Strong energy storage for vehicle jumpstart, charging on equipment, emergency lighting, etc. Jumpstart more than 20 times, 12V/6.8L lMax.] asoline cars, 12V/5.5L[Max.] diesel cars. Pressure-proof and Explosion Proof to Protect Vehicles Smart power management and safe charging/-jumpstart. 60°C High Temperature Protection The high-quality polymer Lithium battery ensures normaL jumpstart in the coLd/high temperature. Emergency Lighting as a Warning One-key switching for constant light, SOS, and flash modes. Park the car to repair by the roadside in Late night and turn on the emergency Light as a warning to prevent secondary accidents Show more
Product Information: >1. Product Name: Baseus Reboost Jump Starter with Portable Energy Storage >2. Battery: Polymer Lithium-ion Battery>3. Type C Input: 5V /3A;9V /3A;12 V/3A;15V /3A;20 V/3A Max.>4.Type C Output: 5V /3A;9V /3A;12V /3A;15V /3A;20V /3.25A Max.>5 USB Output: 4.5V /5A;5V /4.5A;5V /3A;9V /3A;12V /2.5A;20V /1.5A Max.>6. DC Output: 12-16.8V/8A Max.>7. AC Output: 220V/100W/50Hz>8. Type-C+USB+DC+AC Total Output: 100W Max.>9. LED: Color Temperature: 6000K>10. Light Intensity: 45Lm>11. Connector Interface: EC8>12. Peak Current: 1600A(0.1s)>13. Starting Current: 800A(2s)3 Steps to Jumpstart(1) Link, Connect the smart clip to the EC5 interface of the startup power supply.(Red and green lights flash alternately.) (2)Clip, Clip the EC8 intelligent jumper clamps to the positive and negative terminals of the car battery respectively, and the clamps enter the working state with the green light normally on.[Red:+，Black:-] (3) Jumpstart, Start the car, and immediately remove the start-up power supply after the car starts.
