Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor
Thumbnail 1Thumbnail 2Thumbnail 3Thumbnail 4

Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor

4.3/5
Product ID: 21612768
Secure Transaction

Details

  • Brand
    Adafruit
  • Item dimensions L x W x H
    0.75 x 0.75 x
  • Material
    iron
  • Item Weight
    0.06 Pounds
  • Style
    Modern
🌍Pressure Sensor
🌡️Temp Sensor
🌬️Humidity Sensor

Description

🌟 Elevate Your Sensing Game!

  • ULTRA LOW NOISE - Enjoy a low altitude noise of just 0.25m for reliable data.
  • COMPACT EFFICIENT - Designed for easy integration into your projects without bulk.
  • RAPID RESPONSE TIME - Fast conversion times ensure you never miss a weather change.
  • DUAL COMMUNICATION MODES - Seamlessly switch between I2C and SPI for versatile integration.
  • PRECISION AT YOUR FINGERTIPS - Experience accurate temperature, humidity, and pressure readings.

The Adafruit BME280 is a cutting-edge environmental sensor that measures temperature, humidity, and barometric pressure with exceptional accuracy. It supports both I2C and SPI communication protocols, making it versatile for various applications. With a low altitude noise of just 0.25m and rapid conversion times, this sensor is perfect for any weather-sensing project.

Have a Question? See What Others Asked

Hello. will this work with a raspberry pi pico w? thanks for your time.
Does someone know where i can get nodemcu libraries for it?

Reviews

4.3

All from verified purchases

K**X

Good on paper...easy installation...

The installation was easy and the sensor is very small. I have used 2 or 3 of the same type of sensor from another company, which both have died within the last year. I have decided to try a different company and hope for better results. The noticeable difference with this version from Adafruit is that the voltage in supports 3.3V or 5V and SPI or I2C, which the previous boards I had were only 3.3V over I2C. I have an Arduino Yun which primarily uses 5V, so that could be why the previous sensors died so quickly. (I didn't think to check the voltage on the data line, but I am still feeding the sensors 3.3V.) I'll have to wait and see if this can hold out more than a few months.

J**F

Works w/klipper via RPi

I wired this up via i2c through my RPi3, and Klipper can see it just fine. I used the sample configuration provided with Klipper. I’m now monitoring my Voron v0.1 chamber temperature just fine. Stemma/Qwiic wires are pretty small gauge (sold separately from Sparkfun) so wiring at the RPi side was a bit tricky, but the Qwiic connection is so convenient.

A**R

Perfect for a weather station project

Perfect for a weather station project.I used Adafruit library and was up and running in no time. Tested both SPI and I2C protocols and both work great. I used them with Arduino uno, mega and mini pro.The only issue I have (reason for 4 stars ) is that very seldomly all the sensors get stuck and report max values. A power reset always fixes the issue.Overall the sensors, temperature, humidity and pressure are very accurate and with good precision.I'm very pleased with Adafruit quality compared to other manufacturers that reminded that you get what you pay for.Note: Make sure you get the right product. Check for adafruit logo (star). See attached picture.

T**A

Works as expected

The board is small and simple to connect. There are many free Python or Perl libraries online that enable easy readings for temperature, pressure, and humidity. Please note that pressure readings require calibration using your elevation. Default output units are metric (as they should be), and can be easily converted using simple formulas. The only thing I didn’t like about the board was the cost from adafruit on Amazon being a little higher (presumably to recover shipping costs).

S**N

Worked as expected

I am just getting into using sensors with microcontrollers and Raspberry Pi and this was a fun little toy. Had to solder and that turned out ok as a practice piece. Was easy to set up and run using Adafruits resources on the internet.

J**M

OK for fun

Not ok for accuracy. The temperature is way off. (a couple degrees C), and takes 15 minutes to settle in once software starts reading measurements. The same for relative humidity - the reading from the device is off by 17%. These readings are compared to a commercial termperature/pressure/humidity sensor (like you would buy at HomeGoods, Home Depot, or Walmart).

M**E

Inaccurate Picture: STEMMA QT Form Factor

Adafruit changed the 2652 design to use the STEMMA QT form factor. I was happy to find the old design here on Amazon, since I had an old application that used the old form factor. Even though the picture clearly shows the old design, and I've bought it from this supplier before, this time it came in the new form factor. The STEMMA QT design is much cheaper elsewhere, so I only overpaid because I was looking for the old design.

S**.

Very accurate and easy to use

I had to recalibrate it by following a procedure found on Adafruit forum, but after that it worked well. The readings I get from a different sensor (SHT31) are almost the same (within 0.3 deg C, most of the time same temperature is indicated, and less than 0.4% difference in humidity). Plus, it has the pressure sensor!With I2C is very easy to control it.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Imran F.

Very reliable shop with genuine products. Will definitely buy again!

2 weeks ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.

Currently out of stock

KSAstore

Sorry, this item from our KSA store is out of stock. We're restocking soon—check back or contact support for similar products.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Neha S.

Excellent communication throughout the order process. Product is perfect.

2 weeks ago

Adafruit Bme280 I2c Or Spi Temperature Humidity Pressure Sensor | Desertcart KSA