🔥 Heat it up, seal it down! 🔧
The OCS Parts Silicone Tubing is a high-temperature, unreinforced silicone hose designed to withstand extreme conditions. With a maximum operating temperature of 500°F and a burst pressure of 30 PSI, this 10-foot piece is FDA and NSF 51 certified, making it perfect for both industrial and food-safe applications.
Maximum Pressure | 3E+1 Pound per Square Inch |
Nominal Wall Thickness | 1.3 month |
Item Length | 10 Feet |
Item Dimensions L x W | 120"L x 0.31"W |
Material | Silicone |
J**Y
Great RELIABLE Silicon tubing
Great quality, definately lab worthy.We use for moving water post purification.Suction power is not a thing, dealing with tubing for 20years and that's not a quality. It's flexible and can take a lot from pumps and otherwise destructive actions like soap,caustic solutions, repeated barb attachments.Great selection of sizes.Hardly any static even in the smaller sizes where the ratio of ID to thickness is heavy on silicon side.I recommend this brand because it's overall: such a great value.
B**N
Works well with Deluxe Daddy
If you want to replace the tube for a Deluxe Daddy 5/16" I.D. is the correct size but 1/4" I.D. will work - you'll need to jam it on there [1]. More flexible than the DD OEM tube - less tension when you coil it up.[1] Especially if you reuse the tube after cleaning and the inside of tube has residue the tubing will tend to slip off the chamber. Hold the tube on the empty chamber on the heating element and draw 30-60 seconds, rotating the chamber. Check for slippage. Repeat if needed. You're heating up the tube / residue and when it cools it's glued on.
J**S
Will buy again.
We bought these because we have a foot and leg massage machine that we bought here on Amazon. Unfortunately one of the tubes in the leg part broke. We had it for a couple of years. So we went online and we found these tubes and they worked really good. Just make sure you have the exact size that you need.
P**R
Nice but thin, still good after 1-1/2 years
Update: still like new after 1-1/2 years use plumbing a hot water tank made from a 3-gal cooler to a 1/4 in copper coil I made to sit on a stove burner.The hose is perfectly flexible and behaves exactly like it did when new.Nice enough but thin walled so it kinks easily.
R**S
I like the material.
See my comment above. I love the consistency of the material. Just want a different size. Such as 8mm ID and 14mm OD. 10mm ID with 16mm OD. the wall needs to be at least 3mm thick.
T**.
Tubing
Please don't go by the image like I did, that shows different diameter tubing, but is only one size. I'm sure it great, but I wanted a variety of sizes.Thanks
S**L
Real deal
Using it at near max temp holds up real well under the heat. Best tubing I've bought in a decade.
D**O
This is some of my favorite hose.
OK I have no idea why I had to rate the suction power of this. But the hose is good quality fix my coffee maker. No smell to speak of seems to be very good quality. Quite happy.
Trustpilot
1 week ago
1 day ago